8. Information about the device
This part allows to have any information about identification, calibration and after sales service.
To get to it from measurement screen:
➢ Press "Menu".
➢ Go to "Informations" with left and right arrows.
8.1. Identification
➢ Go to "Identification" then press OK.
Screen displays software version number and device serial number.
➢ Press Esc to back to "Informations" menu.
8.2. Calibration
➢ Go to "Calibration" then press OK.
Screen displays calibration date of the device.
➢ Press Esc to back to "Informations" menu.
8.3. After sales service
➢ Go to "After sales service" then press OK.
Screen displays Kimo after sales services phone number and email.
➢ Press Esc to back to "Informations" menu.
20 Information about the device
To Next Page
Loading...
