➢
Remove the front part at the back of the device.
➢
Change the old batterers by AAA LR03 1.5 V batteries.
➢
Replace the front.
CHANGE THE BATTERIES
The device is on and displays the measurements.
➢
Press on « »&: to activate the device backlight.
➢
To deactivate the backlight press again on « &».
*$$"!7
The device is on and displays the measurements.
➢
Press on «&&» until «&?» blinsk on screen.
➢
Press on «&&».
«OFF» or «ON» blinks on screen.
➢
Press on «&&» to activate the keys beep «&/&»&or deactivate the keys beep «7++&».
➢
Press on «&» to validate.
➢
Press on «» to return to the measurement display.
*5%%%;7
The device is on and displays the measurements.
➢
Press on « &» until «&*8++» blinks on screen.
➢
Press on «&&».
The time before device auto shut-off blinks on screen.
➢
Press on «&&» to select the time before device auto shut-off&: 15, 30, 45, 60, 75, 90, 105, 120 minutes or OFF.
➢
Press on «&&» to validate.
➢
Press on «&&» to return to the measurement display.
AUTO
OFF
OFF
,)
AUTO
OFF
30mn
,)
AUTO
OFF
OFF
AUTO
OFF
15, 30mn...
&
m/s
=#&<
°C
ACTIVATE THE BACKLIGHT
,)
BEEP
ON
BEEP
,)
ON
,)
BEEP
OFF
BEEP
,)
OFF / ON
&
m/s
=#&<
°C
Once returned to KIMO, required waste collection will be assured in the respect of the environment in accordance to 2002/96/CE guidelines relating to WEEE
NTang – portable-VT110-VT115 – 10/06/14 – RCS (24) Périgueux 349 282 095 Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.
To Previous Page
Loading...
