Kimo HD110 User Manual

Thermo-hygrometer
HD110
DESCRIPTION OF THE DEVICE
Backlight key
Hold/min/max key
Select key
On/Off/Esc key
OK key
➢
Turn on the device by pressing on “On/Off/Esc”.
The device displays its name “HD110” then the measured values.
➢
Put the probe to the required location.
The device displays the temperature and hygrometry measurements.
➢
Press “OK”.
The device displays the dew point measurement with the temperature measurement.
➢
Press again on “OK”.
The device displays the dew point measurement with the hygrometry measurement.
PERFOM A MESUREAMENT
38.3
% RH
20.5
°C
5.8
°Ctd
38.3
% RH
20.5
°C
5.8
°Ctd
Screen 1
Screen 2
Screen 3
OK
OK
OK

Kimo HD110 Specifications

General

Resolution (Air Velocity)	0.01 m/s
Type of probe	Hot wire anemometer
Temperature range	0 to 50°C
Power supply (Air Velocity)	4 x AAA batteries
Operating Temperature	0 to 50°C
Power Supply (Pressure)	4 x AAA batteries

Summary

Description of the Device

Performing a Measurement

Device Power On and Initial Measurement

Turn on the device and place the probe to obtain initial temperature and hygrometry measurements.

Viewing Dew Point and Temperature

Press 'OK' to display the dew point measurement along with the current temperature.

Viewing Dew Point and Hygrometry

Press 'OK' again to display the dew point measurement along with the hygrometry measurement.

Freeze Measurement

How to Freeze Measurement

Press 'Hold/min/max' to freeze the current measurement. 'Hold' will appear on screen.

Exit Freeze Mode

Press 'On/Off/Esc' to exit the hold function and return to live measurements.

Display Minimum and Maximum Values

View Hygrometry Min/Max

Press 'Hold/min/max' to see max/min hygrometry values measured since last query.

View Temperature Min/Max

Press 'Hold/min/max' again to see max/min temperature values measured since last query.

View Dew Point Min/Max

Press 'Hold/min/max' a third time to see max/min dew point values measured since last query.

Return to Measurement Display

Press 'On/Off/Esc' to exit the min/max display and return to live measurements.

Adjusting Device Settings

Select Measuring Unit

Navigate menu to select between Celsius (°C) or Fahrenheit (°F) for measurements.

Adjust Auto Shut-off Timer

Configure the auto shut-off time (15-120 min or OFF) via the device menu.

Activate/Deactivate Key Beep

Enable or disable audible feedback for key presses through the device menu.

Activate/Deactivate Backlight

Press the 'Backlight' key to turn the device screen backlight on or off.

Changing the Batteries

Battery Replacement Procedure

Remove the front part, replace old AAA LR03 batteries, and reassemble the device.