Kimo MP 120 - Select Measuring Unit in Velocity; Adjust the Auto Shut-off; Activate or Deactivate Keys Beep

Activate or deactivate the keys beep :
The device is on and displays the measurement.
➢
Press on «Select » until « BEEP» blinks on screen.
➢
Press on «OK».
«OFF» or «ON» blinks on screen.
➢
Press on «Select» to activate the keys beep «ON» or deactivate it «OFF».
➢
Press on «OK» to validate.
«BEEP» blinks on screen.
➢
Press on «On/Off/Esc» to return to the measurement display.
Adjust the auto shut-off:
The device is on and displays the measurement.
➢
Press on «Select » until «AUTO OFF» blinks on screen.
➢
Press on «OK».
The time before device auto shut-off blinks at the bottom of the screen.
➢
Press on «Select» until the required time before auto shut-off appears: 15, 30, 45, 60, 75, 90, 105, 120 minutes or off.
➢
Press on «OK» to validate.
«AUTO OFF» blinks on screen.
➢
Press on «On/Off/Esc» to return to the measurement display.
SEL.
AUTO
OFF
30mn
SEL.
AUTO
OFF
OFF
On/Off/
Esc
OK
Select
AUTO
OFF
OFF
AUTO
OFF
15 / 30mn...
0,2
daPa
0.40
m/s
OK
0,2
daPa
0.40
m/s
OK
SEL.
BEEP
OFF
On/Off/
Esc
OK
BEEP
SEL.
ON
BEEP
SEL.
OFF / ON
SEL.
BEEP
ON
Select
Select the measuring unit in velocity:
The device is on and displays the measurement.
➢
Press on « Select» until « UNIT» appears on screen with the velocity unit indicated at the bottom of the screen.
➢
Press on « OK ».
The unit currently used blinks on screen.
➢
Press on «Select» until the required unit appears: fpm, km/h, mph or m/s.
➢
Press on «OK» to validate the unit selection.
«UNIT» blinks on screen
➢
Press on «On/Off/Esc» to return to the measurement display.
On/Off/
Esc
OK
Select
0.1
daPa
0.40
m/s
UNIT
SEL.
km/h
SEL.
UNIT
Km/h
UNIT
SEL.
km/h / m/s...
OK
SEL.
UNIT
m/s