➢
Remove the front part at the back of the device.
➢
Change the old batteries by AAA LR03 1.5V batteries.
➢
Replace the front part.
CHANGE THE BATTERIES
The device is on.
➢
Press on “Backlight” to activate the device backlight.
➢
Press again on this key to deactivate the backlight.
ACTIVATE THE BACKLIGHT
Activate or deactivate the keys beep
The device is on and displays the measurement.
➢
Press on “Select” until “BEEP” blinks on screen.
➢
Press on “OK”.
“OFF” or “ON” blinks on screen.
➢
Press on “Select” to activate the keys beep “ON” or deactivate it “OFF”.
➢
Press on “OK” to validate.
“BEEP” blinks on screen.
➢
Press on “On/Off/Esc” to return to the measurement display.
BEEP
SEL.
OFF / ON
OK
BEEP
SEL.
ON
SEL.
BEEP
ON
Select
On/Off/
Esc
0,00
m/s
25,4
°C
OK
SEL.
BEEP
OFF
Adjust the auto shut-off
The device is on and displays the measurement.
➢
Press on “Select” until “AUTO OFF” blinks on screen.
➢
Press on “OK”.
The time before device auto shut-off blinks at the bottom of the screen.
➢
Press on “Select” until the required time before auto shut-off appears: 15, 30, 45, 60, 75, 90, 105, 120 minutes or OFF.
➢
Press on “OK” to validate.
“AUTO OFF” blinks on screen.
➢
Press on “On/Off/Esc” to return to the measurement.
Select
On/Off/
Esc
OK
SEL.
AUTO
OFF
30mn
SEL.
AUTO
OFF
OFF
AUTO
OFF
OFF
AUTO
OFF
15, 30mn...
0,00
m/s
25,4
°C
OK
Once returned to KIMO, required waste collection will be assured in the respect of the environment in accordance to 2002/96/CE guidelines relating to WEEE
NTang – portable-LV110-LV111-LV117 – 10/11/17 – RCS (24) Périgueux 349 282 095 Non-contractual document – We reserve the right to modify the characteristics of our products without prior notice.
To Previous Page
Loading...
