CONTENTS
Section 1 Information and Requirements PAGE
1.0 Appliance Information 3
1.1 Conditions of Installation 4
1.2 Flue and chimney suitability 4
1.3 Fireplace / surround suitability 5
1.4 Shelf position 5
1.5 Chimney inspection 5
1.6 Fire place opening / catchment space 6
1.7 Fitting to Metal Flue Boxes 8
1.8 Hearths 8
1.9 Spillage Monitoring System 8
1.10 Tactile / Physical Barriers 9
Section 2 Installation of Fire
2.1 Unpacking the fire 9
2.2 Installing the fire box 10-18
2.3 Preparation of the fireplace opening 11
2.4 Gas tightness and inlet pressure (Manual Control models) 19
2.5 Gas tightness and inlet pressure (Remote Control models) 19
Section 3 Assembling Fuel Bed and Commissioning
3.1 Assembling the ceramics and fuel bed 20-22
3.2 Lighting the appliance (Remote Control model) 23-24
3.3 Lighting the appliance (Manual Control model) 25
3.4 Fitting the Concept Fascia 26
3.5 Checking for clearance of combustion 26
products
Section 4 Maintenance
4.1 Removal of the Burner Assembly (Manual) 27
4.2 Removal of the Piezo Igniter 27
4.3 Removal of the Control Tap 28
4.4 Removal of the Oxy-Pilot Assembly 28
4.5 Removal of the Burner Assembly (Remote) 28-29
4.6 Removal of the Remote Gas Valve 29
4.7 Repacing the Oxy-Pilot Assembly 29-30
4.8 Removing the Batteries 30
This appliance is manufactured by :-
BFM Europe Ltd, Trentham Lakes, Stoke-on-Trent, ST4 4TJ
2
To Next Page
Loading...
