Need help?Do you have a question about the Kinetico CP 210s OD and is the answer not in the manual?
General| Salt Storage Capacity | 200 lbs |
|---|---|
| Capacity | 21, 000 grains |
| Valve Type | Non-Electric |
| Regeneration | Demand-initiated |
| Flow Rate (Service) | 12.0 GPM |
| Water Pressure (Min/Max) | 20-80 psi |
| Water Temperature (Min/Max) | 40-100°F |
| Flow Rate | 12.0 GPM |
| Operating Temperature | 40-100°F |
| Operating Pressure | 20-80 psi |
Explains the purpose and scope of the technical manual.
Introduces the Kinetico Commercial Plus Series softeners and their features.
Details technical specifications for various Kinetico CP models.
Lists specific tank sizes and brine tank capacities for CP models.
Provides charts for sizing softeners based on water hardness and flow rate.
Explains how the Kinetico system operates, including key components and functions.
Describes the water meter disc and control disc functions in system operation.
Details the regeneration sequence, pawls, and jet regeneration.
Covers system by-pass, resin tanks, and brine tank configurations.
Outlines initial steps and reviews needed before installing the softener.
Provides step-by-step instructions for installing CP 208-216 models.
Covers the installation of brine tanks and central brining systems.
Introduces a systematic approach to diagnosing softener problems.
Lists ten steps to identify the root cause of a softener issue.
Addresses problems like hard water, iron, and salty taste with solutions.
Covers issues related to flow, pressure, leaks, noise, and cycle sticking.
Identifies parts for the main valve and control assemblies.
Lists parts related to gearing, water flow control, and connections.
Details parts for tanks, brine systems, and water treatment media.
To Next Page