Need help?Do you have a question about the Kinetico MACH Series and is the answer not in the manual?
General| Type | Water Softener |
|---|---|
| Regeneration | Demand-initiated |
| Flow Rate | Up to 12 GPM |
| Stages | Dual Tank System |
| Filter Life | Varies by model and usage |
| Daily Production | Varies by model |
| Storage Tank Capacity | Varies by model |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Salt Usage | Efficient, minimal salt usage |
Advise using pure soaps for better cleaning with soft water, reducing detergent use.
Suggest reducing soap usage by half or quarter for effective cleaning and better suds.
Warns about etching dishes with soft water; recommends specific settings and low-phosphate detergent.
Provides guidance on watering plants and acclimatizing fish to soft water gradually.
Explains Kinetico's countercurrent regeneration process, using soft water for efficient cleaning.
Highlights the benefit of continuous soft water supply with two tanks, one regenerating while the other serves.
Describes technology improving flow and efficiency by passing water through tanks simultaneously.
Details the 4040s system with activated carbon for whole-house dechlorination and odor removal.
Describes the 4060s system with activated carbon for whole-house dechlorination.
Explains the 4060s Macrolite system for iron, particle filtration, and cloudiness removal.
Reiterates the benefits of Overdrive technology for enhanced performance and flow.
Guides on replacing the inline filter when water pressure drops due to sediment.
Instructs to refill the salt storage tank before it runs dry, recommending specific salt types.
Details the procedure for manually initiating the regeneration cycle using a screwdriver.
Explains how to divert water flow around the softener for maintenance or specific needs.
Advises on precautionary measures to prevent system damage from freezing in unheated areas.
Recommends sanitizing the system if the water supply is compromised, following dealer advice.
Suggests using salt with iron additives or separate agents to prevent resin fouling from iron.
Explains salt bridging and how to break it up or prevent it by maintaining brine tank fill levels.
Suggests changing the filter or contacting a dealer if water pressure decreases.
Recommends checking for leaks or high usage if regeneration occurs more often than expected.
Advises checking the by-pass valve and performing manual regeneration if water isn't soft.
Explains that Kinetico systems regenerate on demand, unlike timed older models.
Instructs to check salt level and add salt as needed, avoiding a completely full tank to prevent bridging.
Confirms soft water is safe for drinking but notes potential sodium content; suggests RO for high purity.
To Next Page