Kinetico Kube - Taking It With You; Disconnecting and Packing Kube; Reconnect Supply Line

10
Now that you've enjoyed the benefits of your Kube, be sure to take it
with you when you move by following these simple steps.
1 By-pass Your Kube
Turn the blue by-pass
knob until the white
indicator points to the
by-pass icon
.
2 Remove Filters
Remove Kube filters and
place them in the sink
to drain. TIP: Keep the
cartridges upright after
removal from the system
to prevent water from
pouring out.
7 Turn On Water Supply
Turn the cold water back on, and check
connections to ensure there are no leaks.
3 Empty Tray
Slide the bottom tray
out and empty it in the
sink. Replace the tray into
system. TIP: Remember
to empty the tray after
every filter change as well
as each time you put Kube
into by-pass mode.
4 Turn Off Water Supply
Turn off the cold water at the shutoff
valve. Open the faucet to relieve any
pressure.
5 Remove Kube Adapters
Remove Kube tubing and adapters.
6 Reconnect Supply Line
Reconnect the cold water supply to
the shutoff valve.
Note: Please remember to put all of your connection pieces in a small bag for future
reconnection.
Taking It With You