Need help?Do you have a question about the Kinetico Essential Series and is the answer not in the manual?
General| Brand | Kinetico |
|---|---|
| Model | Essential Series |
| Category | Water Dispenser |
| Language | English |
Explains the water softening process during service operation.
Details how the unit bypasses water during regeneration cycles.
Describes the variable use meter for regeneration frequency adjustment.
Lists the available Essential Gold and Platinum models.
Detailed technical data for the Essential Gold model.
Detailed technical data for the Essential Platinum model.
Information on brine tank specs and valve settings.
Explains Level One assembly, water metering, and AccuDial use.
Details regeneration gearing, control disc, flow control, and nozzles.
Describes Venturi, Level 4, 5, and 6/Base valve functions.
Explains media tank, resin, distributors, riser, brine tank, and valve.
Step-by-step guide for servicing the venturi assembly.
Detailed steps for disassembling the water softener valve.
Step-by-step guide for reassembling the water softener valve.
Instructions for assembling the AccuDial metering mechanism.
Procedures for setting AccuDial and manual regeneration.
Describes the service mode and valve positions.
Details the control flow step initiating regeneration.
Explains bypassing water during initial regeneration.
Describes the isolation step where the outlet valve closes.
Details the vent step and drain valve operation.
Explains the brine draw and flow path during regeneration.
Describes the slow rinse phase of the regeneration cycle.
Details the backwash step to rinse excess brine.
Explains the closing of the drain valve after backwash.
Describes returning to inlet position and refilling brine.
Final step returning the valve to service operation.
Lists various adapters for system connections.
Provides part numbers for adapter kits.
Details different by-pass valve options.
Discusses causes and solutions for hard water issues.
Addresses problems related to excessive salt consumption.
Explains reasons for the unit regenerating too often.
Provides solutions for units stuck in regeneration or service.
Troubleshoots various noises the equipment may produce.
Addresses issues where the unit continuously drains.
Discusses causes and solutions for salty water output.
Lists parts for the Level One assembly.
Details gearing components for Level One.
Lists parts for the Level Three assembly.
Lists parts for the Level 4 assembly.
Lists parts for the Level 5 assembly.
Lists parts for the Level 6 assembly.
Details parts for levels and associated seals.
Lists brine valve, tank, and tube parts for Essential Gold.
Lists brine valve, tank, and drum parts for Essential Platinum.
To Next Page
