Essential Series Gold and Platinum
20
AccuDial Assembly
1. Add support pin 2. Add eccentric pins and stem gears 3. Add control disc
4a. Add regeneration drive pawl with
spring
4b. Regeneration drive pawl with spring
in place
5a. Add a regeneration start pawl with
spring
5b. Regeneration start pawl with spring
in place
6a. Add no back pawl and spring 6b. No back pawl and spring added
7a. Add meter drive pawl 7b. Add meter drive pawl 8. Add lower meter disc
Make sure the meter drive pawl catches
the spring.