Kinetico Premier Compact - Putting the Softener into Service; Service Initiation Procedure; Final Checks and Lid Fitting

www.kinetico.co.uk
15
Fit the lid:
Replace the lids and check
plumbing for any leaks.
The installation is now complete.
6
Put the softener
into service:
a: After the unit has finished the
second backwash and has
pressurised, open the outlet
valve and ensure by-pass
valve is closed.
b: Open a tap in the house to
release trapped air from the
lines rinse out any debris.
5
Inlet
Outlet
Inlet Only
THIS DRAWING AND ITS CONTENTS ARE THE PROPERTY OF KINETICO
INCORPORATED. THEY HAVE BEEN LOANED TO YOU FOR A LIMITED TIME AND
PURPOSE, AND MAY NOT BE COPIED OR DUPLICATED WITHOUT THE WRITTEN
PERMISSION OF AN AUTHORIZED EMPLOYEE OF KINETICO INCORPORATED.
ADDITIONALLY, THE PROCESS, METHOD, DESIGN AND DATA CONTAINED HEREIN,
ARE CONSIDERED TO BE THE PROPERTY OF KINETICO INCORPORATED AND MAY
NOT BE DIVULGED TO ANY OTHER PERSON OR COMPANY NO
R USED TO
KINETICO'S DISADVANTAGE
 
 
















































REV DESCRIPTION ECO DATE BY APPRVD