Page 29
If indicated results are not obtained, go back to Step 3 and run test again. Contact King
Controls if the check switch fails to load after 4 attempts.
8. Save the settings, exit to the main menu screen and wait for programming to download.
9. DISH HD Eastern and Western Arc with Locals only: Verify your saved settings show
your desired satellite trio 61.5, 72, 77 or 110, 119, 129. To switch trios, see page 32.
Configuration is complete. Go to page 30, OPERATION.
Dish HD Alternate with Locals
Bell TV 91
Bell TV HDTV 82/91
Bell TV HDTV 82/91 Alternate
MUST SHOW
“SW64”
NO “X”s
“NO SWITCH
DETECTED”
or
“INSTALLED
DEVICE
UNKNOWN”
or
similar
MUST SHOW
“SW21”
NO “X”s
To Next Page
Loading...
