3. Start watching TV!
Antenna Installation
IMPORTANT! The installer is responsible for determining and supplying the most appropriate fasteners to
roof-compatible sealant. All holes and fastener heads must be sealed so they are completely waterproof.
1. Select an area on the roof for the base mount keeping in mind the following IMPORTANT POINTS:
• A. The antenna must be mounted with the coax channel towards the rear of the vehicle.
• B. The center of the roof hole must be at least 20” away from any object taller than 8” to provide clearance for the
antenna head. The center of the roof hole must also be at least 8” from the edge of the roof.
2. Connect the coax from the power injector’s antenna input to the coax cable in the base mount. (The coax may
come up thru the roof or enter thru the coax channel.)
3. Apply sealant to the base mount, and fill the coax channel with sealant. Place the base mount in position.
4. Fasten the base mount to the roof. Make sure the base mount is sealed all the way around. Make sure the coax
https://tiffin-motor-homes-prod.mindtouch.us/Technical_Support/Class_A/2024/Phaeton/44_OH/Component_Manuals/King/O…
Updated: Thu, 11 Jul 2024 14:42:11 GMT
Powered by
2
To Next Page
Loading...
