To Next PageTo Next PageHow to resolve OTA Channel Signal Lost - 739 error on my KING One Pro KOP4800?
If you're experiencing the 'OTA Channel Signal Lost - 739' error on your KING Antenna, it means the signal has been lost for this over-the-air channel, possibly due to antenna relocation or realignment. Reposition the antenna for the clearest signal and consider rescanning for OTA channels. Also, check for and remove any obstructions.
What causes Channel Signal Loss - 004 on the KING One Pro Antenna?
Channel Signal Loss - 004 on the KING One Pro Antenna may occur if the unit hasn't tracked to the correct orbital slot when you change channels. Verify that there are no obstructions blocking the signal from the newly chosen satellite. If obstructions exist, move the KING One Pro to have a better view of the southern sky and start a new scan. It may take a few minutes to download the electronic program guide and acquire signal before live TV appears.
What to do if my KING Antenna unit does not scan for satellites?
If your KING Antenna unit isn't scanning for satellites, ensure the unit is connected to the power inserter and that the power supply is plugged in and connected to the power inserter. This will ensure the unit is receiving power.
What does it mean when my KING One Pro KOP4800 Antenna displays 'OTA Tuner Module Not Detected - 978'?
The error message 'OTA Tuner Module Not Detected - 978' on your KING Antenna indicates that an over-the-air (OTA) tuner module has been removed. Reinstall the OTA tuner module. The Wally will then prompt you to reset; select YES to proceed.
Why are channels missing on my KING Antenna?
Missing channels on your KING Antenna might be due to the electronic program guide not being set to “My Channels.” Press the GUIDE button on your remote twice to display the “Favorite Channels” menu, and then select “None” or one of your favorite channels list. Also, confirm that you subscribe to the missing channel by using dish.com/mychannels.
General| Frequency Range | 470-862 MHz |
|---|---|
| Polarization | Vertical |
| Impedance | 75 Ohm |
| Operating Temperature | -40°C to +60°C |
| Material | Aluminum |
| Weight | 2.5 kg |
| VSWR | ≤1.5 |
| Antenna Length | 4800 mm |
Essential safety precautions and guidelines for operating and maintaining the KING One Pro device.
Explains factors causing signal loss, such as obstructions and weather, and how to mitigate them.
Details methods for securing the KING One Pro antenna unit to prevent theft or unauthorized movement.
Lists all components included in the KING One Pro package and required separate items.
Instructions on correctly applying the rubber feet to the antenna unit for stability and protection.
Step-by-step guide for setting up and activating a new, unactivated Wally receiver with the KING One Pro.
Instructions for operating the KING One Pro after initial setup, including basic usage and troubleshooting.
Common troubleshooting tips and solutions for general issues encountered with the KING One Pro system.
Specific troubleshooting advice for issues related to Wally receivers when used with the KING One Pro.
