EasyManua.ls Logo

KING RH Series User Manual

KING RH Series
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LIOSW2-Rev. 24418
Print: XM-06/19 (XXX)
RH Series
I
nstallation Manual
Overhead Short Wave Electric Infrared Heater
1, 2, and 3 Lamp Units
WARNING
!
!
All persons involved with the installation, operation, and maintenance of the heater
system must read and understand all the information in this manual.
Improper installation, adjustment, alteration, service, or maintenance can cause
property damage, injury, or death. Read and understand the installation, operating,
and maintenance instructions thoroughly before installing or servicing this
equipment.
INSTALLER: Present this manual to the end user.
Keep these instructions in a clean and dry place for future reference.
Model#: ______________________ Serial #: _____________________________
(located on rating label)
Question and Answer IconNeed help?

Do you have a question about the KING RH Series and is the answer not in the manual?

KING RH Series Specifications

General IconGeneral
Power1500W
Voltage120V
Heating Area150 sq. ft.
ThermostatAdjustable
Safety FeaturesOverheat protection, Tip-over switch
CategoryRadiant Heater

Summary

1.0 Safety

Safety Symbols and Warnings

Symbols and words indicating hazards related to safety or property damage.

Applications Overview

Describes commercial, industrial, and outdoor residential applications for the heater.

Model Designation and Specifications

Details model series, voltage, wattage, lamp types, and operational specs.

Clearances to Combustibles

Information on maintaining safe distances from combustible materials.

Safety Labels and Locations

Provides information on identifying and locating safety labels on the heater.

Standards, Certifications, and Regulations

Outlines installation compliance with codes and certifications.

2.0 Installation

Design and Placement Considerations

Discusses safety considerations for heater layout and placement concerning clearances.

Heating Application and Load Charts

Provides charts for heating application, load estimation, and coverage.

Heater Mounting and Dimensions

Details mounting methods, considerations, and physical dimensions of heater models.

Top Channel Assembly Instructions

Step-by-step instructions for assembling the top channel and wire raceway.

Lamp Installation Procedures

Procedures for safely installing and replacing the quartz lamps.

Outdoor Applications and Electrical Wiring

Guidelines for outdoor installations, electrical connections, and wiring safety.

Wiring Diagrams and Field Wiring

Illustrates wiring configurations and shows field wiring for installation.

3.0 Maintenance

Maintenance Log

A log for recording maintenance performed and replacement parts required.

Troubleshooting Guide

A flowchart to diagnose and resolve common heating and operational issues.

Heater Assembly Components

Identifies and labels various components of the heater assembly.

Parts List

Lists part numbers and descriptions for general, double, and triple lamp models.

Related product manuals