SW2 Series
8
1.0 Safety • Standards, and Government Regulations
Installation of this infrared heater must comply with all applicable local, state, and national
regulations, and building codes. Contact the local building inspector and/or marshal
for guidance.
The heater must be electrically grounded in accordance with the following codes:
United States: Refer to National Electrical Code
®
, ANSI/NFPA 70 (latest edition).
Wiring must conform to the latest edition of National Electrical
Code
®
, local ordinances, and any special diagrams from the manufacturer.
Canada: Refer to Canadian Electrical Code CSA C22.1 Part 1 (latest edition).
following organizations or standards:
• CSA 22.2 #46 - M1988
• UL 2021
King Products units comply with or are certified by one or more of the
To Next Page
