SW2 Series
3
Safety Symbols
Safety is the most important consideration during installation, operation, and maintenance of the
infrared heater. You will see the following symbols and signal words when there is a hazard related to
safety or property damage.
1.0 Safety • Safety Symbols • Applications
Applications
Commercial / Industrial (Indoors & Outdoors)
Infraredheatersaredesignedandcertiedforuseinindustrialandcommercialbuildingssuchas
warehouses, manufacturing plants, aircraft hangars, and vehicle maintenance shops. For maximum
safety, the building must be evaluated for potential hazards before installing the heater system. A critical
safety factor to consider before installation is the clearances to combustibles.
Outdoor Residential Only
This heater is NOT approved for use in an indoor residential application. This includes, but is not limited
to,attachedgarages,livingquarters,solariums,etcetera.Consultthelocalremarshaland/orinsurance
provider if unsure of your application.
1.0 Safety
Not For Residential Use.
Installation of this infrared heater system in residential indoor spaces, RVs,
mobilehomes,etc.mayresultinpropertydamage,re,seriousinjury,or
death.
Warning indicates a potentially hazardous
situation which, if not avoided, could result in
death or injury.
Caution indicates a potentially hazardous
situation which, if not avoided, could result in
minor or moderate injury.
Notice indicates a potentially hazardous situation
which, if not avoided, could result in property
damage.
NOTICE
CAUTION
WARNING
WARNING
Improper installation, adjustment, alteration, service, or maintenance can cause property
damage, serious injury, or death. Read and understand the installation, operating, and
maintenance instructions thoroughly before installing or servicing this equipment. Only
trained,qualiedpersonnelwithproperelectricalexperiencemayinstallorservicethis
equipment.
WARNING