28
FPCSP46-2
Getting Started . . .
Stopping
Release throttle
trigger and
interlock
Engage the chain
brake
Set stop switch
to O
Storage
Empty fuel tank Empty oil Clean and maintain Store
WARNING! This quick start provides only a short overview of how to start
and stop the product! For safe use it is essential to read the entire instruction
manual before rst use!
Intended use
This petrol chain saw FPCSP46-2 is designated with a power output of 1.6 kW. The
product is intended for cutting logs and limbs with a thickness of max. 37.5 cm (see
“Technical specications”).
WARNING! The product may be used by an experienced operator* having
read and understood the safety requirements provided within this instruction
manual using appropriate personal protective equipment (PPE)!
Quick start
To Next Page
Loading...
