Kingfisher NMHT450 - Care and Maintenance; Inspection and Maintenance

EN
19
EN
In more detail...
NMHT450
Operation
Trimming
WARNING! This operation must only be performed when the blades
have stopped running and the product is switched off!
1
Fig. 9
After use
1. Switch the product off, disconnect the product from the power supply and let
it cool down.
2. Attach the blade cover (11) if necessary.
3. Check, clean and store the product as described below.
The golden rules for care
WARNING! Always switch the product off, disconnect the product from
the power supply and let the product cool down before performing
inspection, maintenance and cleaning work!
1. Keep the product clean. Remove debris from it after each use and before
storage.
2. Regular and proper cleaning will help ensure safe use and prolong the life of
the product.
3. Inspect the product before each use for worn and damaged parts. Do not
operate it if you nd broken and worn parts.
WARNING! Only perform repairs and maintenance work according to
these instructions! All further works must be performed by a qualied
specialist!
No name_MNL_NMHT450_Electric Hedge Trimmer_GB_V3_210918_UK.indd 19 9/22/21 4:31 PM