EasyManua.ls Logo

Kingspan Tribune User Manual

Kingspan Tribune
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
IMPORTANT NOTE TO THE INSTALLER
Read these instructions before commencing installation.
Installation Manual For Kingspan Tribune - USA
Issue 4 Sept 2010
Part No. BOOKSTAINULT
Page 1 of 12
Tribune
Question and Answer IconNeed help?

Do you have a question about the Kingspan Tribune and is the answer not in the manual?

Kingspan Tribune Specifications

General IconGeneral
BrandKingspan
ModelTribune
CategoryWater Heater
LanguageEnglish

Summary

IMPORTANT SAFETY INSTRUCTIONS

1. INTRODUCTION

2. INSTALLATION

2.1 UNPACKING AND POSITIONING THE UNIT

Guidance on unpacking, checking for damage, and siting the unit on a stable base with leak protection.

2.2 PLUMBING CONNECTIONS

Details on connecting the tank to plumbing systems, including single/dual coil configurations and pipework.

2.3 IMMERSION HEATERS

Instructions for installing and wiring immersion heaters, including safety precautions and specifications.

3.0 COMMISIONING

3.1 FILLING

Procedure for filling the tank and purging air, ensuring all connections are tight before operation.

3.2 INDIRECT UNITS

Instructions for commissioning indirect units, referencing boiler manufacturer guidelines.

3.3 SAFETY VALVE CHECKS

Checks for expansion and temperature/pressure relief valves during heat-up and manual operation.

3.4 INSTALLATION CHECKLIST FLOW CHART

4.0 MAINTENANCE

4.1 DRAINING

Procedure for draining the tank, including isolation from power and water supplies.

4.2 ANNUAL MAINTENANCE

Essential annual checks for safe operation and performance, including valve tests and component checks.

GUARANTEE

USER INSTRUCTIONS

Related product manuals