Need help?Do you have a question about the Kingtec K35A and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Type | Split System |
| Cooling Capacity | 3.5 kW |
| Voltage | 220-240V |
| Operating Temperature (Cooling) | 18-43°C |
| Power Supply | Single Phase |
Summarizes essential safety measures for personnel during equipment installation.
Details on how to position the air conditioner unit for optimal installation.
Guidelines for isolating the van body, air channel, and ventilator for proper installation.
Factors influencing the heating and refrigerating capability of the van.
Specifies the required roof strength for mounting the air conditioner assembly.
Details on the correct positioning of the unit on the van's roof.
Guidelines on the acceptable angles for unit installation to ensure proper function.
Step-by-step procedures for drilling holes and mounting the unit.
Instructions for connecting the power supply cable to the unit.
Procedures for installing the outdoor part of the unit, including sealing and leveling.
Information on connecting the power supply and interior channel.
Instructions for securing the interior air channel using self-tapping screws.
Explains the function of each button on the control panel.
Guide on cleaning the interior air return filter periodically.
Identifies causes and solutions for compressor failure to refrigerate.
Addresses issues with insufficient or intermittent cooling from the air conditioner.
To Next Page
