Kingtex FTD Series - User Manual

Important safety precautions for operating the sewing machine.

Explanation of the FTD7000 model designation codes.

Codes indicating the intended use of the sewing machine.

Code specifying the presence or absence of top coverstitch.

Specification for the number of needles used in the machine.

Details on the spacing between needles.

Describes the shape of the needle plate tongue for different materials.

Information on optional devices that can be added to the machine.

Details the model number and stitch type of the machine.

Outlines the application range and maximum sewing speeds.

Information on recommended needles and their sizes.

Details stitch length adjustability and feed regulation methods.

Explains differential feed ratio and its external adjustment method.

Specifies the maximum lift height of the presser foot.

Information on the type of lubrication oil and automatic lubrication system.

Instructions for correctly placing and securing the machine head to the table.

Guidance on adjusting machine height with cushions and ensuring clearance.

Details on choosing the correct lubrication and cooling oils for the machine.

Procedure for adding new lubrication oil and checking oil levels.

Instructions for draining and replacing the lubrication oil.

Guidance on checking, cleaning, or replacing the oil filter.

Instructions for filling the needle cooling device with silicone oil.

Guidance on choosing the correct needle size based on fabric and thread.

Proper procedure for installing needles into the machine.

Detailed instructions for threading the machine correctly for all needles and looper.

How to adjust the pressure exerted by the presser foot for proper feeding.

Guidance on adjusting thread tension for all threads for stable seams.

Details on how to adjust the stitch length using the stepless adjustment.

Instructions for adjusting differential feed for shrink and stretch sewing.

How to adjust the needle thread take-up for different threads.

Adjusting the front needle thread guide for stretchable threads.

Adjusting the looper thread take-up for proper stitch formation.

Adjusting the top cover thread take-up for the spreader.

Steps for removing and installing the presser foot and setting its height.

Adjusting the needle bar height and needle drop point.

Procedure for installing the looper correctly into its holder.

How to position the looper correctly relative to the needles.

Setting the correct clearance between the looper and needles.

Adjusting the height and timing of the rear needle guard.

Setting the angle and timing of the front needle guard.

How to set the correct height for the feed dogs.

Installing and positioning the spreader for top coverstitch.

Adjusting the top cover thread guide for proper thread path.

Diagram showing cut-out dimensions for the semi submerged table type.

Diagram showing cut-out dimensions for the fully submerged table type.