Kingtex FT6500 - User Manual

Ensure the belt cover is installed correctly for safe operation.

Verify that the motor wiring is connected correctly and securely.

Always disconnect power and ensure the motor has stopped before maintenance.

Limit machine speed to 4,500 RPM during the first month of use.

Avoid overfilling with lubricating oil; check the oil level indicator.

Check needles for damage and ensure correct installation and orientation.

Ensure the threading process is performed correctly to avoid issues.

Clean the machine, cover it, and shut off power after daily operation.

Instructions for installing the motor, pulley, and belt cover, including initial usage speed.

Guidance on selecting the appropriate needle size based on fabric and thread.

Correct procedure for installing needles, ensuring proper orientation.

Detailed instructions and diagrams for correct thread routing through the machine.