Kingtex FT6500 User Manual

2. 安裝說明 INSTALLATION
自動化省力化裝置代號 AUTOMATION
1-2 副機型區分 SUB-CLASS
線跡形式
2-1 馬達，皮帶輪與皮帶護蓋 MOTOR, BELT AND BELT COVER
代碼
FT:平形床面 FLAT BED.TYPE
針板舌形狀 SHAPE OF STITCH PLATE
運轉中心
TONGUEL:薄類 FOR LIGHT MATERIAL
M:中厚類 FOR MEDIUM TO HEAVY
S:特殊用 FOR SPECIAL PURPOSE
針距 NEEDLE DISTANCE
0:無牽引輪}STANDARD TYPE
1～9:有牽引輪} SUB-CLASS
副機型區分 SUBLASS
00:標準型 GENERAL PLAIN SEAMING
03:滾邊導模 TAPE BINDING
11:盲縫用 BOTTOM HEMMING
13:壓拷克用 OVERLOCK SEAM COVERING
39:送鬆緊帶 ELASTIC TAPE FEEDING
INSTALL BELT AS SHOWN IN THE ILLUSTRATION AND
PLEASE MAKE SURE THE BELT TENSION AFTER INSTALLED
2
F T - 6 5 0 3 - 0 - 5 6 M / N C
48
40
4.8mm
4.0mm
64 6.4mm
56
5.6mm
60 6.0mm
CODE
STITCH TYPE
406
46
407
47
602
62
605
65
607
67
傳動皮帶為 V 形 M 系列三角皮帶，掛上皮帶後請先確?皮帶的鬆
緊度。
離合馬達
本機最高轉速可達 6000 針/每分鐘，一般多以 5000 針/每分鐘來使用，在最初 200 小時(約 1 個月)請
以 80% 的速度來使用，以確保機器的使用壽命。
CLUTCH
MOTOR
THE MAXIMUM SEWING SPEED OF THIS MACHINE IS 6000 S.P.M. AND ORDINARY SPEED IS
CT4600
5000 S.P.M. DURING THE FIRST 200 HOURS (OR FIRST MONTH) OF USING THE MACHINE
PLEASE DO NOT EXCEED 80% OF THE ORDINARY SPEED.

Kingtex FT6500 Specifications

General

Brand	Kingtex
Model	FT6500
Category	Sewing Machine
Language	English