Kingwo MT200 - Page 14

13
Set the primary server domain:www.itracksense.com，Port 9881，
communication type UDP
IP2,ip or dns,port,type#
Set IP, port and communication type of backup server
Eg : IP2,119.23.233.52,9881,1#
Set the backend server IP:119.23.233.52,port 9881，communication
type is TCP
Eg : IP2,www.itracksense.com,9881,0#
Set the backend server domain:www.itracksense.com，port 9881，
communication type: UDP
IP2,0,0# Delete backend server parameter
HC,<T1>,<T2>,<T3>#
Set the upload interval in real time tracking mode:
T1: upload interval in ignition on status, range,5-7200s ,default 30s
T2: Upload interval in ignition off status
,range 5-7200s, default 120 s
T3：Sleep return interval, range 15-7200s, default 180
For example:
HC,30,90# Set the upload interval as 30s in ignition on and 90s in
ignition off
HC,30,90,300# Set the upload interval as 30s, 90 s in ignition off
and 300s while in sleep mode
MINDISTANCE,C#
Set upload interval according to distance :
C,distance,Unit：meter , when C=0 means function OFF
Eg:
MINDISTANCE,200# Upload data each 200 meter
MINDISTANCE,0# Turn off this function
MINSPEEDDELTA,V#
Set data upload according to speed difference
V， Speed change value，Unit：km/h, 0 indicates this function off
Eg:
MINSPEEDDELTA,10#
Protocol Switch:
Set Protocol type :
PROTOCOL,1# Kingwo protocol only
PROTOCOL,2,1# JT808 protocol only
PROTOCOL,3,1# GT800 protocol only
PROTOCOL,2,1;3,1# Dual IP, IP 1 is Kingwo Protocol, IP2 is GT800
protocol
PROTOCOL,1;1# Both IP1 and IP2 are Kingwo protocol
PROTOCOL# Query