Kingwo MT200 - Page 17

16
*25*#
Query OTA Status:
eg:192.168.1.1:8000,T;T8G-1.5;Wireless upgrade request
succeed ,downloading data now!
COLLISION,N#
Set collision class :
N indicates value range 0,10-3000
Default is 0: Disable the collision alarm
Eg:
COLLISION,1000# collision class is :1000
COLLISION# Query
TURNOVER,A#
Set turn over angle :
value range is :0-180
Default is 0: Disable the turn over alarm
Eg:
TURNOVER,90#
TURNOVER# Query
DRIVING,A,V1,V2,T#
Set driving behavior parameter
A: Sharp turn，value range 0-180，default is 0: disable
V1: hard acceleration ，value range 0-255，default is 0: disable the
function
V2:hard deceleration，value range 0-255， default is 0: disable the
function
T:Hard deceleration and acceleration time，1-30，default is 4 seconds
Eg:
DRIVING,15,30,50,4#
Direction changes exceeds 15°, indicates the vehicle is in sharp turn
status
30km/h Speed increased 30km/h within 4 seconds, indicates vehicle is
in hard deceleration status,
50km/h Speed reduced 50km/h, indicates the vehicles in hard
deceleration status ,
DRIVING#
LBS,A#
Set LBS ON and OFF:
A=1 ON ；A=0 OFF，Default is off
Eg:
LBS,1# LBS ON
LBS,0# LBS OFF
LBS# Query