Kingwo MT200 - Page 16

15
XM,tttt#
Set enter sleep mode time while in static status:
Default is 5 minutes
Eg:
XM,5# Sleep after 5 mins without vibration
XM,0# Disable sleep mode function
XM# Query
Query IMEI/ICCID/IMSI
IMEI#
ICCID#
Set blind data storage ON
and Off
，
A=1 Off
；
A=0
，
Default ON
BLIND,1# Turn off blind data storage function
BLIND# Query
*44*6DDDDD#
Set initial mileage:
Unit KM, range 0-999999km
*44*61000#，Initial mileage is :1000Km
SPEED,V,T#
Set speeding threshold and duration time
V: Speeding threshold
：
0-255km/h,0 is disable speeding alarm
T:Duration time, value range >=5 seconds, default is 5 seconds:
Eg:
SPEED,50,5# Speed threshold is 50km/h
，
duration time: 5 seconds
SPEED# Query
VACC,v#
Set ACC detect mode:
v, voltage critical value，unit is :0.1V
v=0，Detect ACC status by ACC signal wire
v=131，Detect ACC status via vibration and voltage, voltage critical
value is 13.1V
Eg:
VACC,0# Detect ACC status by ACC signal wire
VACC,131# Detect ACC status via vibration and voltage, voltage
critical value is 13.1V
VACC# Query
UPGRADE,IP/domain,port,
version#
OTA,IP/domain,port,versio
n#
OTA command:
Eg:
UPGRADE,119.23.233.52,7771,MT02S-4.12#
OTA,www.365qczx.com,7771,MT02S-4.12#
UPGRADE,0# Exit upgrade
UPGRADE# Query upgrade status