td2O441A
(1) Clutch Pedal
Make sure to depress the clutch pe-
dal to its end. To start off smoothly,
put the main and range shift levers
into the proper positions and release
the clutch pedal slowly.
CLUTCH PEDAL
(1) Brake pedal (LH) (2) Brake pedal (RH)
(3) Pedal Interlock latch
(A) Engage (B) Disengage
BRAKE PEDAL
1. Make sure to latch the left and right
brake pedals as shown in the gure
while driving on a road. The tractor
can roll over if depressing only one
brake pedal at a high speed.
2. To make a sharp turn in a work
field, disengage the left and right
brake pedals to use one of brake
pedals separately. Unlock the
brake lock, and then turn the stee-
ring wheel while depressing the
brake pedal on the turning side.
td2O442A
IMPORTANT
Never put your foot onto the
clutch pedal during driving.
Be sure to depress the clu
-
tch pedal fully when shifting.
Otherwise, the shift gear can
be broken.
•
•
CAUTION
Make sure to operate the shut-
tle shift lever only while the
vehicle is stationary. Otherwise,
the vehicle may turn abruptly,
resulting in a personal injury
and transmission damage.
•
To Next Page
Loading...
