Usage
The Fresh Water Station is used to heat up tap water in connection with a buffer tank.
It will be installed next to the buffer tank at the wall or directly onto the buffer tank at special system solutions.
Another use or installation is not intended.
The manufacturer is not liable for damages due to inappropriate use and the operator bears the risk.
Do not connect the Fresh Water station directly to any heat generator.
TheFreshWaterStationincludesaself-sufcientregulationandcanbeupgradedwithanoptionalcirculationunit
Safety instructions and symbol legend
Safety instructions
• Theinstallation,initiationandmaintenancemustonlybeaccomplishedbyqualiedtechnicalprofessionals.
The operation of this device is not allowed to persons (including children) with limited physical, sensory or intellectual
abilities. Uninformed or unacquainted persons may operate the device only under the supervision or at a trained
person’s disposition.
• Replacements or repairing of electrical parts like the power cord must be conducted by a professional electrician.
• Follow the instructions in this manual closely to ensure proper functioning.
• Exclusively use the Fresh Water Station for heating up tap water.
• Only install the device in dry and frost-free locations.
• Operate the device only at ambient temperatures between +2°C and +40° C.
• Interrupt the power supply of the heating system (230 V/AC) prior to installation.
• During operation the device can heat up and burns are possible.
• The device must be connected to an external circuit breaker to allow a shutdown at any time.
• Installation and operation must be performed according to regional laws, regulations and common practice
• At the occurrence of malfunctions – regardless of nature – please contact your authorized technical professional.
Terms of warranty
The Manufacturer issues a warranty of two years from the invoice date on the device and its constituent parts.
Without proper installation and use of the device the warranty is void.
To Next Page
Loading...