EasyManuals Logo

Kipor Sinemaster IG3000 Operation Manual

Kipor Sinemaster IG3000
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
9
4.1(c) Insert the engine key and turn the engine switch to ON position.
4.1(d) Electric Start: turn the engine switch to the START until the engine has started. Do not operate
the starter for more than 10 seconds.
Manual Start: pull the starter grip lightly until resistance is felt then pull the starter grip briskly
toward the arrow as shown below.
Do not allow the starter grip to snap back. Return it slowly by hand.
Do not let the starter rope rub against the generator body or the rope
will wear out prematurely.
Engine switch
Fig.8
Fig.9(a)
Fig.9(b)
Engine switch
Starter grip

Other manuals for Kipor Sinemaster IG3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kipor Sinemaster IG3000 and is the answer not in the manual?

Kipor Sinemaster IG3000 Specifications

General IconGeneral
Rated Power2.8 kW
Maximum Power3.0 kW
Max. AC Output3.0 kVA
Rated Voltage230 V
Rated Frequency50 Hz
Power Factor1.0
Engine Type4-stroke, OHV, single cylinder
Displacement196 cc
Fuel TypeUnleaded Gasoline
Fuel Tank Capacity13 L
Starting SystemRecoil start
Noise Level65 dB at 7 m

Related product manuals