EasyManuals Logo

Kipor Sinemaster IG3000 Operation Manual

Kipor Sinemaster IG3000
43 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #40 background imageLoading...
Page #40 background image
35
14. EMISSION CONTROL SYSTEM
If so designated, your generator has an engine that has been approved by the California Air
Resources Board. Other than the tune up procedures specified in the maintenance section, no
additional maintenance is required.
The emission control system has the following components:
1. Fuel System: The fuel tank, cap, indicator and hoses are specially designed and constructed
to not allow fuel vapors to permeate and be released to the atmosphere.
2. A carbon activated canister collects gasoline vapors from the fuel tank and returns them to the
combustion chamber for burning.
3. A catalyst is built into the muffler to further treat the engine exhaust.
4. A secondary air injection valve adds combustion air to ignite unburned fuel in the exhaust.
Contact your authorized Kipor service center to obtain the correct replacement parts and service on
this system.
Inlet System
M6
()
Air filter housing
Flange nut M6
Filter element
Air filter cover
Carburetor
Main metering jet
Canister
connection

Other manuals for Kipor Sinemaster IG3000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kipor Sinemaster IG3000 and is the answer not in the manual?

Kipor Sinemaster IG3000 Specifications

General IconGeneral
Rated Power2.8 kW
Maximum Power3.0 kW
Max. AC Output3.0 kVA
Rated Voltage230 V
Rated Frequency50 Hz
Power Factor1.0
Engine Type4-stroke, OHV, single cylinder
Displacement196 cc
Fuel TypeUnleaded Gasoline
Fuel Tank Capacity13 L
Starting SystemRecoil start
Noise Level65 dB at 7 m

Related product manuals