Kipor Sinemaster IG3000 - Stopping the Engine; Normal Engine Stopping Procedure; Emergency Engine Stopping

20
7.2 Maintenance Schedule
(1) REGULAR SERVICE PERIOD
Perform at every indicated monthly or
operating hour interval whichever
occurs first
ITEM
EACH
USE
FIRST
MONTH
OR
20HRS
EVERY 3
MONTHS
OR
50HRS
EVERY 6
MONTHS
OR
100HRS
EVERY
MONTHS
OR
300HRS
Check
○
Engine oil
Change
○
○
Check
○
Air cleaner
Clean/replace
○(2)
Spark plug
Clean/adjust
○
Spark arrester
Clean
○
Fuel sediment cup
Clean
○
Valve clearance
Check/adjust
○(3)
Fuel tank and strainer
Clean
○(3)
Fuel lines
Check
Every 2 years (Replace as necessary) (3)
NOTE: (1) Log hours of operation to determine proper maintenance.
(2) Service more frequently when used in dusty conditions.
(3) These items should be serviced by an authorized KIPOR service center unless the owner has the
proper tools and is mechanically proficient. Refer to the KIPOR Generator and Engine shop manuals.
To locate a parts dealer in North America, visit the website www.kipornorthamerica.com.
7.3 Changing oil
Drain the oil while the engine is still warm to assure rapid and complete drainage.
Upper limit
Lower limit