Kirisun PT6500 - Page 15

PT6500 User’s Manual
Page 15 of 30
4. Press , is shown, enter the set of Tx FRQ,
5．Set the Tx FRQ value with the keypad,
6. Press
to delete, and press to confirm.
Set Rx CTCSS/DCS：
1．As shown: in CH 1 , press
to enter select mode,
2. Press / , and Ch Edit is shown,
3. Press to select
4. Press
, is shown, enter the set of Rx CTCSS/DCS FRQ,
5．Set the Rx FRQ value with the keypad,
6. Press
to delete, and press to confirm.
7. stands for the radix point, press ＃ to convert among CTCSS、DCS and
reverse DCS.
Set Tx CTCSS/DCS：
1．As shown: in CH 1 , press
to enter select mode,
2. Press / , and Ch Edit is shown,
3. Press to select
4. Press
, is shown, enter the set of Tx CTCSS/DCS FRQ,
5．Set the Tx FRQ value with the keypad,
6. Press
to delete, and press to confirm.
Ch alias
CHANNEL 1
Rx
CTCSS
401.660000
Ch alias
CHANNEL 1
Tx
CTCSS
XXXX
Tx FRQ
401 660000
*