Need help?Do you have a question about the Kisae DMT1230 and is the answer not in the manual?
General| Brand | Kisae |
|---|---|
| Model | DMT1230 |
| Category | Battery Charger |
| Language | English |
Instructions to avoid obstructing air vents and installing in zero-clearance compartments.
Warnings about death or serious injury, keeping away from children, and specific precautions.
Precautions regarding flammable fumes and maintaining ventilation.
Details FCC compliance for Class B devices and methods to correct interference.
Prohibits use with life support or other medical equipment.
Lists included components and product models (DMT1230, DMT1250) with their ratings.
Details the three primary charge stages: Bulk, Absorption, and Float.
Explains user-defined voltage/current settings and termination current for lithium batteries.
Illustrates the charging curve and explains Bulk, Absorption, and Float stages for battery types.
Provides specific voltage ranges for Bulk/Absorption and Float stages for various battery types.
Recommends minimum battery bank Ah ratings based on charger current settings.
Details available current settings for Bulk/Absorption and Absorption-Float stages.
Guides on selecting charging and termination current for lithium batteries.
Recommends indoor storage, avoiding sunlight, heat, moisture, and ensuring ventilation.
Details vertical mounting in indoor or marine environments and using the unit as a template.
States the unit chassis must be grounded properly for safety and compliance.
Highlights the need for appropriate DC wiring size, over-current protection, and DC disconnect switches.
Offers tables for cable specifications and fuse protection for various connections.
Provides specific fuse/breaker recommendations for Alternator, Solar Panels, and House Battery.
Outlines steps for connecting positive and negative wires for CH1 (House Battery) and other channels.
Shows a diagram for connecting batteries, solar panels, and optional accessories.
Details connecting the RJ12 plug to the port and ring terminals to the battery's negative terminal.
Explains the location and function of the ON/OFF switch for activating and deactivating the charger.
Describes how the charger uses CH1, CH2, and CH3 inputs and display behavior changes.
Explains voltage ranges, start-up, shutdown, and recovery voltages for CH3 input.
Details PV input voltage range, under/over voltage shutdown and recovery, and charging mechanism.
States the recommended maximum solar wattage input and allowable overdrive.
Describes display contents, fault/warning codes, and icon meanings during normal operation.
Details icons for CH1, CH2/CH3, Voltage (V), Current (A), Auto, Priority, Mode, and Temp.
Explains the INFO, NEXT, and SET button functions for navigation and setting changes.
Explains how to force charging from CH3 using Manual Override mode and its risks.
Describes the Bulk, Absorption, Float sequence (Mode 3) and Bulk, Absorption sequence (Mode 2).
Details the BTS function for protecting batteries and improving voltage accuracy.
Lists manual settings (Lo, Nor, Hi) and how BTS adjusts voltage based on temperature.
Details voltage adjustments for Flooded, GEL, and AGM types based on temperature.
Refers to appendices for the procedure to set or view charger settings.
Provides DANGER warning and steps for activating and performing equalization on flooded batteries.
Details protection against de-rating, over-temperature shutdown, reverse polarity, and flat batteries.
Defines codes like bUL (Bulk), Abs (Absorption), and FUL (Float) indicating charging stages.
Details codes E01-E08 and A01-A02, their causes, and potential solutions.
Details output ratings, DC input/output parameters for CH1, CH2, and CH3.
Includes operating conditions, physical dimensions, weight, and regulatory compliance.
Lists available optional accessories for the unit.
Covers defects in materials/workmanship for one year for the original purchaser.
Explains contacting customer service, returning products, and repair/replacement procedures.
Excludes accessories, normal wear and tear, accidents, misuse, and failure to follow instructions.
Illustrates the steps to select battery types like GEL, AGM, Flooded, Lithium, or Program.
Shows the process to set the bulk charging current, with options for different current values.
Illustrates setting the current for the absorption to float stage.
Shows how to select and set the charge mode for the charger.
Details the steps to select temperature compensation settings (Lo, Nor, Hi).
Provides step-by-step guide to adjust absorption to float current values for various modes.
Illustrates the process to select and confirm the charge mode setting.
Shows the procedure to select and confirm temperature compensation settings.
Illustrates how to set the lithium battery voltage, with adjustable steps.
Shows the process to select and set the maximum charging current for lithium batteries.
Illustrates setting the termination current for lithium battery charging.
Shows the process to set various charging current values for lithium batteries.
Illustrates setting the termination current for lithium battery charging.
Shows how to select and confirm the charge mode for lithium battery type.
Shows how to navigate to and select the Program battery type.
Illustrates setting the bulk voltage for program battery type, with adjustable steps.
Shows how to set the float voltage for program battery type, with adjustable steps.
Shows the process to set various bulk current values for program battery type.
Illustrates setting absorption to float current for program battery type.
Shows how to select and confirm the charge mode for program battery type.
To Next Page
