KitchenAid 27" - Timer and Cooking Functions; Convection Cooking Settings

5
Clearance Dimensions - Flush Installation
Flush Installation Requirements
A 25³⁄₈" (64.5 cm) minimum cutout depth is required.
These dimensions will result in a ¹⁄₄" (6 mm) reveal on all sides of the warming drawer.
The front face of the cleats and platforms will be visible and should be treated as a finished surface.
27" Models 30" Models
A Width of flush inset cutout (minimum) 27¹⁄₄" (69.2 cm) 30¹⁄₄" (76.8 cm)
B Height between cutouts (minimum) 2¹⁄₂" (6.4 cm) 2¹⁄₂" (6.4 cm)
C Height of flush inset cutout (minimum) 10³⁄₄" (27.3 cm) 10³⁄₄" (27.3 cm)
D
Bottom of cutout to floor (recommended) 8¹⁄₄" (21.0 cm) 8¹⁄₄" (21.0 cm)
Bottom of cutout to floor (minimum) 5" (12.7 cm) 5" (12.7 cm)
E Width of opening (minimum) 25¹⁄₄" (64.1 cm) 28¹⁄₄" (71.8 cm)
F Depth of cutout (minimum) 25³⁄₈" (64.5 cm) 25³⁄₈" (64.5 cm)
e Recommended outlet location
e
A
B
C
D
1" (25 mm)
Side Cleats*
⁷⁄₈” (22 mm)
Platform*
Front View
F
Side Cleat*
1⁵⁄₈" (4.1 cm)
Top View
E
Cabinet
Back
F
Side View
www.goedekers.com