6
ATTACHING/REMOVING THE BOWL
PRODUCT USAGE
LIFTING/LOWERING THE MOTOR HEAD
NOTE: Motor Head should always be in lock position when using the Stand Mixer.
To attach Bowl: Turn speed control to
“0” (OFF). Unplug Stand Mixer.
1
To lift Motor Head: Push the locking
lever to the UNLOCK position and lift
the head. Once lifted, the lever will
automatically go back in LOCK position
to keep the head lifted.
1
Place Bowl on Bowl Clamping Plate. Turn
Bowl gently in clockwise direction.
3
Unlock and lift the Motor Head. Then,
lock* the head to keep it lifted.
2
To put down Motor Head: Push the
locking lever to UNLOCK and gently
bring the head down. The locking lever
will automatically go back in LOCK
position when the head is down. Before
mixing, test lock by attempting to raise
Motor Head.
2
To remove Bowl: Repeat steps 1 and 2.
Turn Bowl gently counterclockwise.
4
*Locking option is available on select models.
W11520569A.indb 6W11520569A.indb 6 6/17/2022 3:25:54 PM6/17/2022 3:25:54 PM
To Next Page
Loading...
