7
PRODUCT USAGE
*Included with select models only. Also available as optional accessory.
ATTACHING/REMOVING THE FLAT BEATER, FLEX EDGE BEATER*,
WIRE WHIP, OR DOUGH HOOK
To attach accessory: Turn speed control
to “0” (OFF). Unplug Stand Mixer.
1
To remove accessory: Repeat steps 1
and 2. Press accessory upward as far as
possible and turn to the left. Then pull
accessory from the Beater Shaft.
4
Unlock and lift the Motor Head. Then,
lock** the head to keep it lifted.
2
Slip accessory onto Beater Shaft and
press upward as far as possible. Then,
turn accessory to the right, hooking
accessory over the pin on the shaft.
3
**Locking option is available on select models.
W11520569A.indb 7W11520569A.indb 7 6/17/2022 3:25:59 PM6/17/2022 3:25:59 PM
To Next Page
Loading...
