12
OPERATING THE HAND BLENDER OPERATING THE HAND BLENDER
Before First Use
Before using the Hand Blender for the
first time, wipe the motor body, the whisk
adapter, and chopper adapter with a clean,
damp cloth to remove any dirt or dust.
Mild dish soap may be used. Do not use
abrasive cleansers. Dry thoroughly with a
soft cloth. Wash all accessories, see “Care
and Cleaning” section for more information.
Assembling the Hand Blender
4
If using a pan guard, place it on a flat
surface and position with mounting clips
between the ports of the blade.
3
Insert blending arm into motor body
and twist until it clicks to lock in place.
Port
Mounting
grips
2
Remove the bell guard from the blade.
Use the pan guard to
avoid damage to cookware
while using Hand Blender.
Bell guard
Pan guard
1
Insert blending arm into bell blade (see
“Attachment guide”). Twist to lock until
it clicks.
Use the bell guard to
avoid damage to blade
when Hand Blender is
not in use.
NOTE: Do not put whisk adapter or chopper adapter in dishwasher.
W10529667A_01_EN.indd 12 12/28/12 12:51 PM
Downloaded from www.vandenborre.be
To Next Page
Loading...
