7
USING THE STIR TOWERPARTS AND FEATURES
SELECTING STIR SPEEDS
Before rst use
1. Remove all packaging materials, if present�
2. Wash the Side Scraper and Flip-and-Stir
Wand attachments in hot, sudsy water�
Dry thoroughly�
Attaching the Stir Tower to the Multi-Cooker
4
Raise the stir arm by pressing down on
the release lever�
2
Make sure the Stir Speed Selector is set
to the 0 (OFF) position� Place the stir
tower on a sturdy, level surface such as
a countertop, with enough space for the
Multi-Cooker�
3
Align the pins on the Stir Tower shaft
with the slots on the
flip-and-stir
wand
� Press the
wand
up and rotate
counterclockwise to lock into place�
1
If using both attachments: Align the tab
on the top of the flip-and-stir wand with
the groove on the side scraper and slide
into place�
Use the ip-and-stir wand by itself when cooking foods with larger pieces or when
sautéeing and frying in smaller quantities�
Add the side scraper blade when preparing soups, stews, and sauces to help circulate
ingredients thoroughly�
W10822849A_Final.indd 7 8/20/15 10:02 AM
To Next Page
Loading...
