ASSEMBLING THE JUICER
2
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
For Stand Mixers with a removable attachment hub cover: Turn the attachment knob
counterclockwise to remove attachment hub cover.
Attaching the Juicer assembly to the Stand Mixer
1
Turn Stand Mixer OFF and unplug.
4
Tighten attachment knob until the Juicer
attachment is completely secured
to Stand Mixer.
3
Insert the juicer into the attachment
hub. Rotate attachment back and forth
if necessary. The pin on the attachment
housing will fit into the notch of the hub
rim when in proper position.
To Next Page
Loading...
