KitchenAid 720-0733D - Installation Instructions; Freestanding Outdoor Grill Installation

INSTALLATION INSTRUCTIONS
Freestanding Outdoor Grill Installations
4. Loosen 2 screws on the grill side panel but not remove them
completely and remove 1 screw on the grill control panel.
B
Unpack Grill
1 R ll k i i l d ill f h
A
A. Grill control panel screws
B. Grill side panel screw
1
.
R
emove a
ll
pac
k
ag
i
ng mater
i
a
l
s an
d
remove gr
ill
f
rom t
h
e
shipping base.
2. Move grill close to desired outdoor location.
3. Open the grill hood.
Remove Packaging Material Inside the Grill
1. Use a utility knife to cut yellow straps and packing tape to
o
p
en box from to
p
and remove the boxes
5Ali
hb k hl f
iid
bbl
pp
2. Remove foam block and wrap from inside the grill.
3. Remove the warming rack and grill grates from inside the
grill and remove the package inside the firebox.
5
.
Ali
gn t
h
e
b
ottom
k
ey
h
o
l
es o
f
sear
i
ng s
id
e
b
urner
b
ow
l
assembly to the 2 screws on the grill side panel which
loosened in step 4 that the searing side burner bowl
assembly will be hung on the 2 screws.
6. Attach the top of the side shelf to the grill (A) by inserting
the 3 screws removed in step 3 into the side shelf from
inside the grill hood and tighten. See illustration in step 8.
7. Attach the bottom of the side shelf to the side panel (B)
of the grill by inserting the 2 screws removed from the
of
the
grill
by
inserting
the
2
screws
removed
from
the
grill side panel in step 4. The drip pan may need to be
pulled forward to install the center screw (C). Tighten the
screws. See illustration in step 8.
8. Attach the side shelf to the control panel (C) by inserting
the screw removed from the grill control panel in step 4.
Tighten the screw.
B
A
A
Attach Right Side Shelf with Sear Burner
1. Unpack right side shelf with sear burner.
2. Open grill lid.
3. Remove 3 screws from the side of the searing side burner.
A
C
A. Searing side burner screws
13