English
5
The toaster may emit a pungent odor
or light smoke the first time you use it.
This is a normal result of the
manufacturing process. The odor or
smoke is harmless and will dissipate
quickly.
If the function light remains dark
and the toaster fails to heat when
the “O/I” Switch is turned to “I”:
Check to see if the toaster is plugged
in; if it is, unplug the toaster, then plug
it back in again. A tone will sound
when the toaster is plugged into a live
electrical outlet. If no tone sounds,
check the electrical circuit the toaster is
connected to – is a fuse blown or a
circuit-breaker tripped in your home?
If the problem cannot be corrected, see
the KitchenAid Warranty on page 11
for service information.*
If you have difficulty removing the
crumb tray:
Lifting the crumb tray handle locks the
crumb tray inside the toaster,
preventing removal. Always pull the
crumb tray straight from the toaster
without lifting the handle.
If the function light next to the
“O/I” Switch flashes:
A flashing function light signals a fault
in the toaster electronics. Unplug the
toaster and refer to the KitchenAid
Warranty on page 11 for service
information.*
Troubleshooting Problems
*Do not return the Toaster to the retailer – they
do not provide service.
To Next Page
Loading...
