12
CARE AND CLEANING
Cleaning the Siphon Coffee Brewer
3
Cover the bottom of the stainless steel
siphon tube with the palm of your hand.
Fill the brew unit with hot tap water,
moving it in a circular motion to rinse
away remaining coffee grounds.
1
Dump the brewed coffee grounds into
a waste basket. Gently tap the brew unit
with the palm of your hand to remove
coffee grounds remaining on the sides
of the brew unit.
2
Turn the coffee filter handle
counterclockwise to unlock and
remove. Then wash the coffee filter
by running under warm water. Allow
to air dry.
4
Hold the stainless steel siphon tube
above a sink and remove the palm
of your hand to empty the water and
coffee grounds from the brew unit.
Repeat steps 2 and 3 as needed.
5
Use the angled brush and hot, soapy
water to finish cleaning the brew unit;
then, rinse with clean water. Allow to
air dry with the lid removed, or dry
with a soft towel.
6
Use the angled brush and hot, soapy
water to clean the carafe; then, rinse
with clean water. Allow to air dry with
the lid removed, or gently dry the
inside with a soft towel.
IMPORTANT: To avoid damage, do not
immerse the carafe in water.
To Next Page
Loading...
