8
ASSEMBLING THE SIPHON COFFEE BREWER
Before rst use
Before using your Siphon Coffee Brewer for the first time, wash the carafe, brew unit,
brew unit stand, filter, and lid in hot, soapy water, then rinse with clean water and dry. To
avoid damage, do not fully immerse the carafe in water, and do not use abrasive cleaners
or scouring pads.
NOTE: The entire Siphon Coffee Brewer is hand wash only. To avoid damage, do not
wash any part of the carafe, brew unit, brew unit stand or the base with power cord
in a dishwasher.
2
Place the brew unit stand on a flat,
sturdy surface. Insert the stainless steel
siphon tube into the brew unit stand.
Preparing the Siphon Coffee Brewer for use
1
Place the base with power cord on a flat,
sturdy surface and plug it into a 3-prong
grounded outlet. If desired, wrap excess
cord around the cord holder on the
bottom of the base.
To Next Page
Loading...
