KitchenAid KCM1208DG - Troubleshooting Guide

ENGLISH
11
TROUBLESHOOTING GUIDE
Problem Solution
If the display is not illuminated:
Plug into a grounded outlet. If you have a circuit breaker
box, make sure the circuit is closed.
If only a portion of the water
added to the Coffee Maker
actually brews:
The Coffee Maker requires immediate descaling. Please
refer to the “Care and cleaning” section.
If you hear 3 rapid tones:
There is no water in the Water Tank. See the “Filling
water for brewing” section.
If “Er1” ashes on the display
and you hear 1 tone:
A button may be jammed. Unplug and press each button
several times. Plug the Coffee Maker. If “Er1” appears
again on the display, repeat this procedure.
If coffee overows the Brew
Basket:
The Brew Basket is not correctly in place. See the
“Assembly Of Brew Basket” section.
Too much coffee ground was placed into the Brew Basket.
Used both Gold tone lter and paper lter together.
If water exits from the back of
the Coffee Maker:
Too much water was poured into the Water Tank.
If the problem is not due to one
of the above items:
See the “Arranging for Service” chapter in the “Warranty
and Service” section. Do not return the Espresso Machine
to the retailer as they do not provide service.
WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or
electrical shock.