Do you have a question about the KitchenAid KDPE234GPS and is the answer not in the manual?
Style | built-in dishwashers |
---|---|
Color | stainless steel |
Load Capacity | 14 |
Number of Cycles | 5 |
Cycle Selections | express wash, normal, prowash, rinse only, tough |
Options/Settings | 2-4-8 hour delay, extended dry, heated dry, hi temp wash, sani rinse |
Noise level | 46 decibels adjusted |
Delay Start | yes |
Load Sensor | yes |
Number of Racks | 3 |
Water Filter | yes |
Water Softener | no |
Sanitize Settings | no |
Annual Energy Consumption | 270 kilowatt hours |
Voltage | 120 volts |
Depth | 24 1/2 inches |
---|---|
Height | 34 1/2 inches |
Width | 23 7/8 inches |
Net Weight | 102.1 pounds |
Details grounding requirements for cord-connected dishwashers and outlet installation.
Outlines grounding requirements for permanently wired dishwashers.
Lists essential precautions to follow when using the dishwasher, covering loading and operation.
Warns about tip-over risks and improper installation or door use.
Provides warnings about chemicals known to cause cancer or reproductive harm.
Details the ProWash cycle's ability to sense soil and adjust for efficient cleaning.
Describes the ProScrub option for targeted cleaning of stubborn food soils.
Explains the procedure for starting, resuming, and adding dishes to cycles.
Guidance on selecting and adding the correct type and amount of detergent.
Provides tips on loading dishes to ensure effective cleaning and avoid damage.
Instructions on how to fill the rinse aid dispenser and adjust settings.
Guidance on choosing wash cycles based on soil level and speed.
Procedures for initiating, resuming, or adding dishes to a cycle.
Solutions for when the dishwasher fails to start or operate.
Troubleshooting steps for detergent not dispensing or remaining in the tub.
Explains reasons for long cycle times and potential solutions.
Addresses issues related to dishes not drying properly after a cycle.
Solutions for when the dishwasher does not fill with water.
Troubleshooting steps for water not draining from the dishwasher tub.
Solutions for hard water issues, white residue, and glassware cloudiness.
Solutions for food particles not being removed and general dirty dishes.
Troubleshooting for excess suds, dirty dishes, or incomplete cycles.
Explains what blinking sanitized light indicates and how to resolve it.
Discusses causes of dishware damage and interprets blinking lights and error codes.
Solutions for cloudy or spotted dishes, often related to hard water.
Addresses permanent cloudiness on glassware caused by etching.
Troubleshooting steps for water leaks from the dishwasher.