Kitvision Escape HD5W - Downloading Wi-Fi App; Pairing Camera to Device; Using Wi-Fi

Using Wi-Fi
With the Escape HD5W’s built-in Wi-Fi, you can use your smart
device as a camera remote, viewfinder, and download files to
your phone.
Downloading the Wi-Fi App
• The Wi-Fi app is available to download for free at the
Apple App Store™ and Google Play Store™
• Androidusers:EntertheGooglePlayStore™, search for
“iSmartDV”,downloadandinstall,followingthisusermanual
to connect the Wi-Fi and operate
• Phone users: Enter the Apple App Store™, search for “iSmart
DV”,downloadandinstall,followingthisusermanualto
connect the Wi-Fi and operate
Pairing the camera to your device
1. Turn on the camera and press the Up/Wi-Fi Button (12)
2. The LCD (11) will show the message ‘Waiting for Wi-Fi connection…’
3. Search for a Wi-Fi hotspot on your smart phone/tablet, select
the“EscapeHD5W”networkandyouwillbepromptedfora
password;enter“1234567890”toproceed.
4. Once connected the camera’s LCD (11) will enter sleep mode.
If a camera button is pressed whilst the camera is in Wip-Fi
mode, the camera will disconnect from your device.
5. Openthe‘iSmartDV’applicationandwaitforthelivefeedto
be shown as per Figure 1.
iSmart DV
2322