Kitvision Escape HD5W - Connecting the Camera

Connecting the camera to an HDTV
1. Connect the micro HDMI end of a micro HDMI to HDMI cable
(notincluded)tothecamera’smicroHDMIPort(8),andthe
otherendtotheHDTV’sHDMIport.
2. TurnontheHDTVandselecttheappropriateHDMIsource.
3. Follow the instructions for ‘Playback of files’ mentioned
earlier in this manual.
4. Whenviewingisnished,turnoffthecameraandHDTV
before removing the HDMI cable.
Connecting the camera to a PC
There are two ways to download files from the camera’s
micro SD to a computer:
• ByinsertingthemicroSDintoacardreader
• By connecting the camera to a computer using the supplied
micro USB cable
Connecting the camera to a PC with the USB cable
1. Connect one end of the supplied USB cable to the camera’s
micro USB Port (6), and the other end to the PC’s USB port
and turn the camera on.
2. Turn on the camera, a ‘Connecting’ prompt will appear
on the LCD Screen (7), select ‘MSDC’.
3. Open [My Computer] or [Windows Explorer®] on your PC.
‘Removable Disk’ will be in the drive list. Double-click the
‘Removable Disk’ icon to view its contents. Files stored
on the camera are located in the folder named ‘DCIM’.
4. Copy the files that you want to your PC.
3332