Kitvision Escape HD5W - Using Playback Mode;Viewing Video Files; Using Time Lapse Mode

Using Time Lapse mode
By selecting Time Lapse mode you can take a series of photos at
set intervals, when stitched together it will create a video effect
of a very slow frame rate to show movement over a long period
of time. Photos captured in Time Lapse mode will be saved as
singlelesandexternalsoftwareisrequiredtoconvertthe
captured photos into a video file. The Time Lapse settings
can be changed in the Settings mode.
1. Turn on the camera and press the Power/Mode Button (3)
to enter the Mode menu and select Time Lapse mode.
2. Use the LCD Screen (11) to view your shot, and then press
the Shutter/Ok Button (1) to activate the Time Lapse photo
sequence.AteverysetintervaltheLCDScreen(11)willash
and the camera will sound a ‘Beep/Shutter’ sound effect.
3. The camera will continue to take a photo at every interval
until deactivated by pressing the Shutter/Ok Button (1) again.
Using Playback mode
1. Turn on the camera and press the Power/Mode Button (3)
to enter the Mode menu and select Playback mode.
2. To navigate through your files use the Up Button (12)
and Down Button (14).
Viewing video files
1. Once a video file is selected press the Shutter/Ok Button (1)
to play.
2. Whilst playing the video file you can fast forward by pressing
the Down Button (14) or rewind by pressing the Up Button (12).
3 Whilst playing the video you can pause by pressing the
Shutter/Ok Button (1).
4. Press the Power/Mode Button (3) to return to the
selection screen.
1312